• Fuel polishing systems

DDM6

A powerful high flow mobile fuel polisher using a two-stage filtration principle, so that solid contamination, microbial activity and water ingress are all removed in a single pass. Flow rates up to 500 l/min for tanks up to 500,000 litres.

  • Flow rates up to 500 l/min
  • Filtasorb2 water removal media able to remove 100% free water and 99% entrained water from diesel fuel
  • System rated at 10 bar working pressure with safety shut-off at 3.5 bar
  • Optional secondary outlets allow the filters to be bypassed
  • Leakage or Spillage alert with float switch located in drip tray

Interested in this product?

Our team are on hand to assist with your enquiry.

Stored fuel can develop solid particulate, water and diesel bug contamination if left for greater than 12 months without being replaced or cleaned. The DDM6 delivers a throughput of up to 500 l/min, removing both solid particulate and water in a single pass so that fuel is clean, dry, within specification and ready for use when required.

For equipment working in dirty locations in large operations across the globe it is critical that the filtration system can perform in the most challenging environments. Each DDM6 housing is hydrostatically pressure tested to the European Pressure Equipment Directive, 97/23/EC.

Technical specifications

ModelDDM6
Flow rate (l/m)500 litres/min
Indicative tank size (l)500,000 litres
Filtration Efficiency (max.)99.9%
Particulate Removal (min.) (µm)1
No. filter housings6
Filter size & typeSize 2
Control SystemPush-Button
Pump TypeSelf Priming Centrifugal or as specified
Maximum System Pressure10 bar
Remote Emergency StopYes
Differential Pressure IndicatorMechanical x6
Bund Float SwitchYes
Starter ContactorYes
Voltage (V)415
Frequency (Hz)50
Noise Level (dBA @ 1m)< 85
Operating Temperature (°C)0 to 50°C
Environmental ProtectionIP66
Dimensions (mm)1750 (h) x 2270 (w) x 1340 (d)
Dry Weight (kg)614

Get a quote today

Our team are on hand to assist with your enquiry.