- Fuel polishing systems
DDM5
A powerful high flow fuel filtration and polishing module using a two-stage filtration principle, so that solid contamination, microbial activity and water ingress are all removed in a single pass. Flow rates up to 250 l/min.
- Flow rates up to 250 l/min
- Filtasorb2 water removal media able to remove 100% free water and 99% entrained water from diesel fuel
- System rated at 10 bar working pressure with safety shut-off at 3.5 bar
- Optional secondary outlets allow the filters to be by-passed
- Leakage or Spillage alert with float switch located in drip tray
Interested in this product?
Our team are on hand to assist with your enquiry.
Stored fuel can develop solid particulate, water and diesel bug contamination if left for greater than 12 months without being replaced or cleaned. The DDM5 delivers a throughput of up to 250 l/min, removing both solid particulate and water in a single pass so that fuel is clean, dry, within specification and ready for use when required.
For equipment working in dirty locations in large operations across the globe it is critical that the filtration system can perform in the most challenging environments. Each DDM5 housing is hydrostatically pressure tested to the European Pressure Equipment Directive, 97/23/EC.
Technical specifications
| Model | DDM5 |
| Flow rate (l/m) | 250 litres/min |
| Indicative tank size (l) | 50,000 litres |
| Filtration Efficiency (max.) | 99.9% |
| Particulate Removal (min.) (µm) | 1 |
| No. filter housings | 4 |
| Filter size & type | Size 2 |
| Control System | Push-Button |
| Pump Type | Self Priming Centrifugal or as specified |
| Maximum System Pressure | 10 bar |
| Remote Emergency Stop | Optional |
| Differential Pressure Indicator | Mechanical x4 |
| Float Switch | Yes |
| Voltage (V) | 230 / 415 |
| Frequency (Hz) | 50 |
| Noise Level (dBA @ 1m) | < 85 |
| Operating Temperature (°C) | 0 to 50°C |
| Environmental Protection | IP66 |
| Dimensions (mm) | 1745 (h) x 1660 (w) x 1345 (d) |
| Dry Weight (kg) | 501 |