- Fuel polishing systems
DDF1
A compact wall-mounted fuel polishing cabinet designed for removing the particulate and water contamination that accumulates in stored fuel. With dual particulate and water removal and flow rates of up to 50 l/min, the DDF1 leaves fuel ready for use at any time.
- Compact wall mounted unit
- Stainless steel cabinet enclosure
- Flow rates of up to 50 l/min
- High volume dirt holding capacity to deliver ISO cleanliness codes of 18/16/13 or better
- Extensive selection of filter cell inserts to suit every clean-up application
- Differential pressure gauge indication of system performance
- Water drain valve on sump of filter housing
- Rugged frame with integral drip tray
- Safety features as standard; emergency stop, beacon alarm & float switch
- Suitable for most diesel, kerosene and biodiesel (B100)
- Clean, dry fuel, ready for use when required
- Recover and reuse contaminated fuels
- Low running costs
- Can be moved between tanks or dedicated to a single tank
- Single pass cleanliness
- Ideal for tank cleaning and fuel recovery
- Optional real time analysis of oil/fuel cleanliness levels enabling cleaning to a pre-set ISO level
Interested in this product?
Our team are on hand to assist with your enquiry.
Stored fuel in the tank will deteriorate over time due to oxidisation and microbial activity, and tank storage is more susceptible to microbial activity as sludge is often found at the bottom of these tanks.
Technical specifications
| Model | DDF1 |
| Flow rate (l/m) | 50 litres/min |
| Indicative tank size (l) | 10,000 litres |
| Filtration Efficiency (max.) | 99.9% |
| Particulate Removal (min.) | 1 µm |
| No. filter housings | 1 |
| Filter size & type | Size 9 |
| Enclosure | Mild Steel / Stainless Steel |
| Control System | Push-Button |
| Pump Type | Self Priming Vane |
| Maximum System Pressure | 3 bar |
| Remote Emergency Stop | Yes |
| Differential Pressure Indicator | Electrical |
| Float Switch | Yes |
| Voltage (V) | 230 |
| Frequency (Hz) | 50 / 60 |
| Noise Level (dBA @ 1m) | < 85 |
| Operating Temperature (°C) | 0 to 50°C |
| Environmental Protection | IP66 |
| Dimensions (mm) | 900 (h) x 900 (w) x 400 (d) |
| Dry Weight (kg) | 66 |
| Inlet Connections | 1″ BSP M |
| Outlet Connections | 1″ BSP M |
| BMS System | Yes |
Optional Add-Ons
-
Automatic Biocide Dosing
-
Particulate Counter
-
Automatic Multi-Tank Changeover
-
Automatic Self-Priming Stage
-
Automatic Water Drainer
-
Beacons and sounders (WB Range)
-
Drip Trays
-
Fieldbus, Modbus and other BMS Communications
-
Portable
-
Stainless Steel Enclosure
-
Stainless Steel Frame
-
WASPnet Cloud Monitoring
Need something specific? We can customise this system to your exact requirements